Fluke 3000 Tone Generator & Probe set
has strong transmitter and big speaker
for easy identification and tracing of wires, even inside walls.
Bed-of-nails clips AND modular plug.
Belt pouch included.
FREE SHIPPING in the USA.
This is what you need for identifying one pair of wires in a bunch, and for tracing wire from a jack to the source of dialtone. It even works through walls!
The Fluke Pro3000 has convenient "angled bed-of-nails" clips to allow easy access to individual wires or terminal clips or screw terminals, and the boot-protected RJ11 modular plug is ideal for use on telephone or data jacks.
Handy switch lets you select solid or alternating tone options indicated by solid or flashing LEDs.
Five tones are available. Continuity testing and line polarity confirmation are also provided.
Large speaker in the probe makes it easier to hear tones in noisy
environments, and through walls and enclosures to find wires quickly. You can
send a tone up to 10 miles (16 kilometers) on most cables. When touching the wires together and momentarily shorting the far end of a cable pair, the SmartTone technology will change the cadence of the tone generated. This tone change you hear through the probe positively verifies the correct wire pair.
Tone and trace wire on non-active networks
SmartTone™ technology provides five distinct tones for exact pair
Sends loud tone up to 10 miles (16 kilometers) on most cables
Loud speaker on Probe makes the tone easier to hear through drywall, wood,
and other enclosuresComes with spare probe tip.Angled bed-of-nails clips allow easy access to individual pairs
RJ11 connector is ideal for use on telephone jacks
Attach nylon pouch (included) to your belt for easy transport and protectionFREE "ground" shipping to all 50 states.
For telecom, data, video, audio, alarm, control or almost any non-powered wiring. Attach the nylon
pouch to your belt, and you will be equipped for any wire identification job.